Ok picture post!

Here's the bonnet folded and fitted, not quite happy with the gap you can see down the side of the nosecone - hope to sort that soon.

Today I started to make the seats, plywood bases mounted on some 25mm SHS steel.


Here you can see the detail of the steel supports under the seat bases.

And here's the nosecone after 2 coats of colour - I finally settled on Peugeot Aegean Blue. After this pic I applied 2 coats of clearcoat and it's looking really good. A few hours of polishing and it'll look great. Also painted the front arches at the same time.