I have now fabricated, painted and fitted the seat back panel out of the 1mm steel plate i had. Although it's quite heavy when compared to an aluminum one, it adds quite a bit of stiffness to the chassis now it's riveted on.

I have also fixed on the scuttle, with 4 M8 bolts right through the chassis rails, it's very strong and won't be coming off again in a hurry!

And, I've welded on ALL the seat belt mounts. All 8 of them! Then pained them and the surrounding chassis to prevent rust.

Yesterday I made a template for the dash cowling from some very thin (0.5mm) aluminium and clamped it on - looks pretty good. the actual panel will be made from 1mm ally.

next couple of jobs on the list are to glass on the titanium mount to the nosecone, fix the now expanded nosecone in place and then make up a template for the bonnet. Also make a template and cut out the ally for the rear panel, then fix that in place. Hope to get all that done this week. Fingers crossed.

As an aside, I bought the front suspension units off ebay last week. When i fitted them, the car sank all the way down their travel - no good. So I have ordered some stiff springs to fit on them, and hopefully all will be well! Fitting them is a doddle.